Instructions for Use of the Yellow Rack

Did you know that you can watch a video at www.yellowrack.com that shows how to use the Yellow Rack? At the home page, click on the link in the left sidebar, Yellow Rack Videos, then scroll down to the second video screen.  

Each Yellow Rack is shipped with complete instructions for its use. We hope these instructions will answer any questions that you have about the product. Feel free to call 832-260-3624 or 832-260-3648 if you need any information!

Always place the Yellow Rack as close to the door of the trailer as you can. It will be out of the way of heavy equipment and is the best place to keep load bars handy.

Metal spring fittings are included with the Rack. Simply slide those onto the Rack on each end, making sure the metal clip tabs are both facing upward on the same side. Yellow Rack is ready for use!

The retention rod can be inserted into the Yellow Rack from either side; the large tabs that hold the rod are called compartment arms. When the retention rod is properly fitted to hold equipment in the Rack, you will see the locking tab on the rod to the INSIDE of the first compartment arm. Having the retention rod locking tab in this position is key to keeping the rod in the Yellow Rack when the trailer is in motion.

Thanks for your attention!                            Yellow Rack Team

 

Comments

There have been no comments made on this article. Why not be the first and add your own comment using the form below.

Leave a comment

Please complete the form below to submit a comment on this article. A valid email address is required to submit a comment though it will not be displayed on the site.

HTML has been disabled but if you wish to add any hyprlinks or text formating you can use any of the following codes: [B]bold text[/B], [I]italic text[/I], [U]underlined text[/U], [S]strike through text[/S], [URL]http://www.yourlink.com[/URL], [URL=http//www.yourlink.com]your text[/URL]